| | | | |
|
|
|
|
|
|
21-Headlight- Note the gaps arrowed. Naz told me this is correct. I'm not happy with it so I'm building up the area and re-working it. See additional pics for detail...
Viewed: 1098 times.
|
| 22-N/s headlight profile to body-
Viewed: 921 times.
|
| 23-Reworked headlight- After some filler work its sitting better now. Still alot more to do in the area though.
Viewed: 913 times.
|
| 24-Front with lights and bumper( not fitted)-Headlights in their correct positions- N/S still needs reworking.
Viewed: 860 times.
|
| 25-Headlight and surround reworked- Personally I think this looks much better now.
Viewed: 866 times.
|
|
| | | | |
| | | | |
|
|
|
|
|
|
35-Lightpod and grills-I cut the rear out of the light pods as the lights didn't sit back far enough. I'll eventually glass the backs on again.
Viewed: 808 times.
|
| 36-Light pod and indicator-As you can see, even with the backs off I'm gonna have to rework this more to get the lights seated correctly.
Viewed: 875 times.
|
| 37-Light pod work-To get the rear lights to sit back far enough I had to cut off the backs of the pods, space and reglass. It took ages to fill/sand and get just right. I think these could have been better from Parallel.
Viewed: 819 times.
|
| 38-Grill edge work-My light pods/rear grille didn't sit flush. I ended up cutting out the joining fibreglass and adding back a glassed alumimium strip and filled smooth.
Viewed: 1007 times.
|
| 39-N/s rearlights setback correctly-Finally the rear lights fit in the pods properly. I'm happy now.
Viewed: 937 times.
|
|
| | | | |
| | | | |
|
|
|
|
|
|
51-Front light sockets-I ran the front loom to this point and terminated the plugs for fog and side/repeaters in the corner. The lights themselves are mounted in the bumper of course. The loose wires are for the front headlights.
Viewed: 803 times.
|
| 52-Frontfog mounting(rear view)-I glassed in a galvanised strip here to hold.
Viewed: 836 times.
|
| 54-Horn fitted- O/S location opposite to washer bottle.
Viewed: 827 times.
|
| 55-Bumper lights incl clingfilm-I wrapped the fog light in cling film whilst I glassed and worked around it. It worked well.
Viewed: 785 times.
|
| 63-Wiring-Spaghetti Junction......
Viewed: 909 times.
|
|
| | | | |
| | | | |
|
|
|
|
|
|
96-N/s headlight work-I'm still working around the headlights. I've heightened the edge next to the boot to take up the excess hight I couldn't remove from lowering the rubber lip. It actually looks more orignal now.
Viewed: 778 times.
|
| 102-Rear lights fitted-Rear pods/lights in place. Finally.
Viewed: 719 times.
|
| 103-Full beam working-I fired up the loom, and there was light!!!!!! Here the full beam and sidelights are on together.It looks like the dip beam is on too- though that's the camera flash. I had problems with the fogs but its sorted now.
Viewed: 795 times.
|
| 104-Sidelights and dip beam working-Dip beam all working. They work independently of the high beam, they actually go out when this is engaged. The only time they BOTH work is when you 'flash' the lights.
Viewed: 831 times.
|
| 105-Rearlights working-Powered up the rear lights. Bingo- worked first time. Number plate lights too.. Phew. They are on here- honest. Its the flash I think.
Viewed: 759 times.
|
|
| | | | |
Album: 
1 
