|
 |
||
|
 |
|
|
||
|
At first I tried a 3/4 cut to the top of the window area from the engine bay side in the hope that I could pull the bottom edge back to allow the glass to sit correctly. No such chance-it wasn't going to be that easy! So I cut the whole damn thing off and moved it back 20mm. This also required me to grind off the top edge window lip entirely. This also exposed an air pocket in the gelcoat in the roof edge which needed filling(glad I found that!!)I then glassed the bottom back on and created a new top lip seen here.
|
||
|
|||||||||
|
Album:
|