|
 |
||
|
 |
|
|
||
|
Front Boot Panneling - I made up some fibreglass side pannels to blank off the front boot from the headlight area and form a seal. I'll eventually cover these in carpet when I trim the area. A little tip here, the panel is not flat (curved inwards towards the headlight from the boot) I found the easiest way to achieve this was to make up a template of the shape first, lay a sheet of fibreglass, and cut this whilst still curing known as the (green) stage. Bend and hold in position till cured.
|
||
|
|||||||||
|
Album:
|